Specifications

REFERENCE MANUAL
NSI CORPORATION MC 24/48 Version 1.03
28
EXAMPLE: To patch a channel to a dimmer in the Patch display:
[#] [AT] [# list] [ENTER]
EXAMPLE: To patch by dimmer in the Patch display:
[DIMMER] [# list] [AT] [#] [ENTER]
EXAMPLE: To remove a single dimmer from the currently selected channel:
[MINUS] [DIMMER] [#] [ENTER]
EXAMPLE: To assign a proportional level to a dimmer when patching:
[#] [AT] [#] (DIM LEVEL) [#] [ENTER]
RELATED TOPICS:
[DIMMER]
(LEVEL)
[PROFILE]
(PROFIL)
[PLAYBACK]
Location: Display keypad, bottom row.
You can use the [PLAYBACK] Display hard key to change the screen to the Playback display. The cues
are displays in gray with the current cue in White. The Playback display updates the Submaster level and
sub type, and the current status of the cues running on playback faders. The Playback display Status bar
shows the Stage Cue and the Next Cue.
RELATED TOPICS:
(A/B) (C/D)
(SubP #) (Q Mode)
(PORT)
Location: [S2] in PATCH alternate value (LINEAR)
The Patch display of the MC 24/48 may be viewed with the dimmers numbers in a linear fashion
(consecutive 1 through.. ##) or they may be viewed by dimmer port. When the (PORT) soft key is pressed,
the dimmer number change and each data out put is numbered 1a, 2a ... 1b, 2b... 1c, 2c.. etc. This is