Specifications

REFERENCE MANUAL
NSI CORPORATION MC 24/48 Version 1.03
26
1. Press [9] [ENTER] selects Number of Macros menu item
2. Press [#] [ENTER] enter number of Macros. Valid 0 to 500*
*depending on configuration
@ NOTE: Increasing the number of macros will affect the remaining number of Cues, Groups and
Submaster pages.
F
ADVANCED TOPICS: Refer to Chapter 21 Macros for addition information on the operation
of and programming of Macros.
Number of Playback Cue Rows
Location: Setup display menu item #6.
(this item reserved for future feature implementation)
Number of Submaster pages
Location: Setup display menu item #8.
The MC 24/48 control console is capable of holding up to 8 pages of Submaster assignments depending on
the specific setting selected by the user. Each "page" can contain up to 24 Submaster assignments
corresponding to the 24 Submasters and their associated bump buttons. In the maximum configuration this
would allow a total of 192 assignments.
& EXAMPLE: To assign the quantity of Submaster pages for a given show:
1. Press [8] [ENTER] selects Number of Submaster Pages menu item
2. Press [#] [ENTER] enter number of pages. Valid 1 to 8
@ NOTE: Increasing the number of Submaster pages will affect the remaining number of Cues,
Groups and macros.
F
ADVANCED TOPICS: Refer to Chapter 7 Basic Submaster Operation and Chapter 14
Advanced Submaster Operation for addition information on the
operation of Submasters and Submaster pages.