Specifications

REFERENCE MANUAL
NSI CORPORATION MC 24/48 Version 1.03
25
@ NOTE: Increasing the number of Effect Steps will affect the remaining number of Cues, Groups
and Submaster pages.
F
ADVANCED TOPICS: Refer to Chapter 15 Effects for addition information on the operation of
and programming of Effects.
Number of Groups
Location: Setup display, menu item #11.
The MC 24/48 control console is capable of holding up to 500 Groups. A Group is a recorded sequence of
channels and levels, similar to a cue but without timing information. The primary purpose for a group is
fast recall of a series of related channels and their proportionate levels for easy setting of levels in the
creation of cues.
& EXAMPLE: To assign the quantity of groups available for a given show:
1. Press [11] [ENTER] selects Number of Groups menu item
2. Press [#] [ENTER] enter number of Groups. Valid 0 to 500*
*depending on configuration
@ NOTE: Increasing the number of Groups will affect the remaining number of Cues, Macros,
Effects and Submaster pages.
F
ADVANCED TOPICS: Refer to Chapter 14 Groups for addition information on the operation
of and programming of groups.
Number of Macros
Location: Setup display menu item #9.
The MC 24/48 control console is capable of holding up to 500 macros. A Macro is a recorded sequence of
commands that may be played back with the touch of one of the 8 macro keys in the Display keypad.
& EXAMPLE: To assign the quantity of macros available for a given show: