Specifications

REFERENCE MANUAL
NSI CORPORATION MC 24/48 Version 1.03
23
The (MP #) soft keys is used to select which page of Macros are active on the [M1] - [M8] Macro keys.
Each page of macros contains 8 recordable macros.
& EXAMPLE: To change the from macro page 1 to macro page 2:
1. (MP 1) command line responds "Macro Page"
2. [#] [ENTER] enter number of new macro page, 2 in this case
-N-
(NAME)
Location: [S6] in PREVIEW, CUESHEET
The (NAME) soft key activates the alphanumeric mode of the MC 24/48 allowing the user to enter, Cue,
Group or Submaster Names.
Network Remote
Location: Set-up display, menu item #20
(this item reserved for future feature implementation)
Number of Channels
Location: Set-up display, menu item #7
The maximum number of control channels on the MC 24/48 control console is 384. This number should
not be confused with the number of manual channel faders. The valid number range for this menu item is
48 to 384 depending on the requirement of your show.
& EXAMPLE: To assign the quantity of channels available for a given show:
1. [7] [ENTER] selects Number of Channels menu item
2. [#] [ENTER] enter number of channels. Valid 48 to 384
& EXAMPLE: To set up a show with 200 channels:
1. [7] [ENTER]