Specifications

REFERENCE MANUAL
NSI CORPORATION MC 24/48 Version 1.03
22
[MINUS]
Location: Data keypad
Use the [MINUS] hard key to subtract channels from within a list of channels, or to subtract channels from
an existing effect step. You can use the [MINUS] key in the Command Line to subtract items from the
command. You can also use the [MINUS] key at the beginning of a record command to prevent recording
specified channels.
& EXAMPLE: To use the [MINUS] key in the Command Line to address channels and levels:
[GROUP] [1] [MINUS] [CHANNEL] [3] [AT] [FL] [ENTER]
- or -
[1] [THRU] [100] [MINUS] [GROUP] [1] [AT] [FL] [ENTER]
RELATED TOPICS:
Channel Lists
(MINUTE)
Location: [S3] when any time key is pressed [TIME], [DELAY] and [FOLLOW] in CUESHEET,
TRACKSHEET and PLAYBACK or EFFECT
When entering a time value for fades or effect steps, the MC 24/48 will allow up to 99.9 seconds to be
entered. However since the MC 24/48 will also allow fades up to 99 minutes this soft key is used to
identify when inputting minutes or seconds.
(MORE)
Location: [S8] in PREVIEW, DEVICE, CUESHEET, TRACKSHEET, and SETUP
Anytime the [S8] key displays a value of (MORE), this means there are additional soft key function
accessible. Pressing the (MORE) key will change the soft key assignments to the next level.
(MP #)
Location: [S2] in STAGE, PREVIEW, CUESHEET, and PLAYBACK