Specifications

REFERENCE MANUAL

NSI CORPORATION MC 24/48 Version 1.03

You can use the Effect hard key on the Data Entry Keypad to assign or delete an effect from a cue, load an

effect to a Submaster, or create a channel list from an effect. (The Effect key on the Data Entry keypad is

different from the Select Effect (SELEFF) soft key.)

& EXAMPLE: To assign an effect to a cue:

[CUE] [#] [EFFECT] [#] [ENTER]

& EXAMPLE: To remove an effect that is already assigned to a cue:

[CUE] [#] [EFFECT] [ENTER]

& EXAMPLE: To load an effect to a Submaster in any display:

[RECORD SUB] [#] [EFFECT] [#] [ENTER]

[ENTER]

Location: Data keypad

Use the [ENTER] hard key to execute any command that you have entered into the Command Line.

Pressing [ENTER] may also be a single command to capture all channels above zero, and place them

under wheel control. In the Preview and Tracksheet displays, actual zero levels are captured with the Enter

command because they are "hard" zeros.

When you execute any command in which information is destroyed or replaced, a Warning Message dialog

box requests confirmation before erasing the data, and you must press the [ENTER] key a second time in

order to execute the command.

Most commands require you to press [ENTER] to execute the command, although some commands that

change system settings do not.