Specifications

REFERENCE MANUAL
NSI CORPORATION MC 24/48 Version 1.03
16
either DMX-512 or CMS
3. [ENTER] press to confirm selection.
@ NOTE: If you need to use a dimmer protocol other than DMX512 or CMX, (such as AMX or
analog control) there are a number of commercially available protocol converters.
These can be rented or purchased from theatrical equipment suppliers or from NSI. For
more information, call NSI Corporation Customer Service at [phone].
(DISK)
Location: [S4] in SETUP
Use the (DISK) soft key in the SETUP display to activate the Disk sub menu. Shown Below, this menu is
used to read and write information to and from a 3.5", 1.44 Meg, IBM format floppy diskette.
1 = Save currently loaded show to the floppy disk.
2 = Load file already saved on disk into MC 24/48.
3 = Delete existing file saved on disk.
4 = Change the name of a file already on the floppy disk.
5 = Copy an existing file and give copy a new name.
6 = Initialize a floppy disk for first time use.
7 = Re-read the existing operating system from a back-up
diskette or load a new updated system software.
(DISPLAY)
Location: [S3] in SETUP
(This item is reserve for implementation of future feature)
-E-
[EFFECT]
Location: Data keypad