Specifications

REFERENCE MANUAL
NSI CORPORATION MC 24/48 Version 1.03
14
[DEVICE]
Location: Display keypad, bottom row.
Use this button to activate the Device Display. The Device display is arranged to allow the user to see and
adjust the traits of Moving Lights and Automated Lighting Devices.
[DEVICE]
Location: Data key pad, second row.
Use this button to activate the LCD Display to adjust settings for a selected Automated Device.
& EXAMPLE: To activate LCD display to adjust settings for Device 4:
[DEVICE] [4] [ENTER]
(DEVICE)
Location: [S6] in TRACKSHEET and SETUP
This short-cut soft key simply scrolls the TRACKSHEET display to the right, positioning it at the first
Moving Light or Automated Device. When pressed the value of this key will change to (CHANNL) as its
alternate value.
RELATED TOPICS:
(CHANNL)
[DIMMER]
Location: Data keypad
Use the [DIMMER] hard key for a variety of commands. In the Stage Display, the [DIMMER] key may
be used for Direct Dimmer Control and dimmer check. In the Patch display the [DIMMER] key is used to
patch a dimmer to a channel, or assign dimmer attributes. Note that the same command syntax is used in
both displays, with very different results.
Direct Dimmer Control: In the Stage display, this command bypasses the patch and allows you to
control a dimmer live on stage. It overrides any channel control level, proportional dimmer levels and