Specifications

REFERENCE MANUAL
NSI CORPORATION MC 24/48 Version 1.03
13
-D-
[DELAY]
You can use the [DELAY] hard key to assign a delay time to a cue, to a split "up" or "down" time, or to a
cue part. The delay indicates the amount of time after pressing the GO button that the fade delays before
starting, after which the fade executes. The Delay column appears in the Cuesheet and Playback displays.
The delay can be split, specifying separate delays for the up time (channels increasing in level) and down
time (channels decreasing in level), including a value of zero.
& EXAMPLE: To assign a delay in the Stage, Playback, Cuesheet and Preview displays:
[CUE] [#] [DELAY] [#] [ENTER]
& EXAMPLE: To assign separate delay times to a split time cue:
[CUE] [#] [DELAY] [#] [AND] [#] [ENTER]
& EXAMPLE: To delete an existing delay:
Select [CUE] [#] [DELAY] [ENTER]
RELATED TOPICS:
[CUE]
[RECORD CUE]
[TIME]
(DELETE)
Location: [S5] in PREVIEW, CUESHEET, and TRACKSHEET
The (DELETE) soft key is used in the PREVIEW, CUESHEET and TRACKSHEET displays to delete a
cue.
& EXAMPLE: To delete an existing cue:
(DELETE) [#] [ENTER] (note the system will NOT ask for confirmation)