Operating instructions

Colortrac SmartLF Cx 40 Installation and Operating Manual

COPY - To have SmartLF Cx scan to the Windows printer press the printer icon in the Copy button. First select the

target Windows printer where the copy will be printed first using the I-button.

EMAIL - To have SmartLF Cx scan to e-mail press the envelope in the Email button. This requires a configured email

client to be set up first, e.g. Outlook Express.

NOTE: For fragile originals SmartLF Cx can be slowed down using the Quality slider

accessed from the i-box in the top left corner of the SmartLF interface. As soon as the

required function is selected SmartLF Cx begins to scan the document loaded in the

scanner or waits for the document to be loaded. SmartLF Cx will display the animated

icon showing a document being loaded into the scanner.

PRESSING THE RUNNING FUNCTION ARROW ICON STOPS SMARTLF CX

SmartLF Cx can also be controlled from the scanner’s control panel by pressing the

corresponding panel buttons. These will only operate the SmartLF software if they

have been correctly configured through the Windows XP Cameras and Cameras icon

that is located in the Windows XP Control Panel. Refer to Section 10.

SMARTLF CX COLOR MODES AND SPEED SETTINGS

COLOR GRAYSCALE BLACK AND WHITE

SmartLF Cx can be slowed down

if necessary by using the Quality

slider found under the i button at

the top left corner of the SmartLF

interface.

The color mode allows control

of the number of colors and

the brightness of the file, copy

or emailed document image

The grayscale mode allows

control of the brightness of the

file, copy or emailed document

image

The black and white mode

allows control of the type and

degree of thresholding of the

file, copy or emailed document

image

SCAN

COPY

ARROW MEANS

WAITING FOR A

DOCUMENT TO BE

LOADED