Operating instructions

Colortrac SmartLF Cx 40 Installation and Operating Manual

16. WINDOWS XP AND PANEL CONTROL OF THE SCANNER

The XP Windows Image Acquisition Device Driver Interface (WIADDI) supports custom scanner interfaces allowing

SmartLF Cx hardware to start key program operations. The SmartLF Cx scanner SCAN and COPY buttons can be

used to start and stop these primary software functions from the scanner control panel instead of, or in conjunction with

the software. They operate with the standard SmartLF, ScanWorks and CopySmart software but only with the

Windows XP operating system. To set up the panel buttons go to the Windows XP Control Panel and set the

properties for ‘Scanners and Cameras’ as below.

IMPORTANT: TO ACTIVATE THE SMARTLF S/W REMOTELY FROM THE SCANNER CONTROL PANEL THE

RELEVANT BUTTON MUST BE PRESSED FOR AT LEAST 0.5 SECONDS

17. YOUR FIRST SCAN (FILE) WITH SMARTLF CX

SmartLF Cx is designed to make scanning-to-file,

scanning-to-copy and scanning-to-email extremely

simple to achieve.

Note that Colortrac recommend the emailing function

be used for black and white TIFG4 technical drawings

or small, low detail color scans only.

Load a document into SmartLF Cx NOW

(Until a document is scanned and displayed in the preview window, no zoom and crop tools are visible)

SMARTLF CX ‘SCAN-TO- ‘ FUNCTIONS

FILE - SmartLF Cx scanning to file is started by pressing the diskette icon in the File button. First sse the Browse

button to select the storage location for the new file.

CONTROL PANEL

PREVIEW

WINDOW