User manual

Colortrac Flatbed Installation and Operator Manual.
PAS119
8
4.3 Start Scanning
The host software initiates the scan. Please refer to the software 'Tool Tips’ built into
ScanWorks for hints on software operation or for more detail refer to the ScanWorks User
Manual.
4.4 Control Panel
The display on the bottom right hand corner of scanner indicates its status. The Forward
and Reverse buttons allow the scan head to be moved along the length of the scan path.
Forward Button Advances the scan head away from the panel
Reverse Button Moves the scan head in the reverse direction
Indicates an error condition. Contact your supplier
for help and assistance.
(constantly rotating image)
Indicates that the scanner is warming up /
normalising
(Image not moving) Indicates that the scanner is ready
(Moving bar) Indicates that the scanner is scanning
ALT Allows display brightness/contrast to be adjusted
Advance Button Reverse Button