Operating instructions

Colortrac Scanner Installation and Operating Manual.

PAS106

3 INSTALLATION

3.1 Unpacking and Installation

Please refer to the sheet included in the packaging of your scanner headed:

HOW TO INSTALL YOUR SCANNER

3.2 Scanner Cabling and Set-up

Before connecting the scanner to the power supply, please ensure that the local supply is

within the voltage and frequency range specified on the voltage rating plate on the back of

the scanner. The scanner automatically senses the local power supply and requires no

operator setting.

The scanner may be connected to the host computer via the Ultra-Wide SCSI connector or

the IEEE1394 FireWire connector. Colortrac Ltd recommends the use of the FireWire

connector if you are running Windows 2000/XP on the host computer.

Rear of scanner

Power connector

and switch

SCSI connector and

Firewire connector