Certifications 2

Page 5/11
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 02.07.2020 Revision: 02.07.2020Version number 10
Trade name: CMP 2K Klarlack gl. 500ml
(Contd. of page 4)
51.0.17
xylene
WEL Short-term value: 441 mg/m³, 100 ppm
Long-term value: 220 mg/m³, 50 ppm
Sk; BMGV
·
Ingredients with biological limit values:
xylene
BMGV 650 mmol/mol creatinine
Medium: urine
Sampling time: post shift
Parameter: methyl hippuric acid
·
Additional information:
The lists valid during the making were used as basis.
·
8.2 Exposure controls
·
Personal protective equipment:
·
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Do not inhale gases / fumes / aerosols.
Avoid contact with the eyes and skin.
Avoid contact with the eyes.
·
Respiratory protection:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or
longer exposure use self-contained respiratory protective device.
Filter A2/P3
·
Protection of hands:
Protective gloves
·
Material of gloves
Butyl rubber, BR
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer.
·
Penetration time of glove material
Butyl rubber gloves with a thickness of 0.4 mm are resistant to:
Acetone: 480 min
Butyl acetate: 60 min
Ethyl acetate: 170 min
Xylene: 42 min
Butyl rubber gloves with a thickness of 0.4 mm are solvent resistant for 42- 480 minutes. As protective
measure, we recommend that users and responsible persons for work safety assume solvent resistance length
of 42 minutes. Considering the data in section 3 of this SDS, one can assume longer resistance length in
particular cases.
·
Eye protection:
Tightly sealed goggles
GB
(Contd. on page 6)