User`s guide

7
The following table lists the different ways you can
connect displays to your RADEON 9200 Series with
a single monitor (VGA) configuration.
CRT display +
TV
VGA connector +
TV Output
Unsupported configuration if
the CRT display is attached to
the DVI-I connector via a DVI-I-
to-VGA adapter*
DFP display +
TV
DVI-I connector +
TV Output
CRT display +
DFP display
VGA connector + DVI-I
connector
CRT display +
CRT display
VGA connector + DVI-I
connector with DVI-I-to-VGA
adapter*
The DVI-I connector can
support a CRT display using a
DVI-I-to-VGA adapter*
CRT display +
DFP display +
TV
VGA connector + DVI-I
connector + TV Output
The TV display will “clone” the
image of one of the other two
displays.
CRT display +
CRT display +
TV
UNSUPPORTED
CONFIGURATION
Display
Configuration
Connector(s) Used Comments
One CRT display VGA connector
CRT- cathode ray tube analog
display
One TV TV Output
Cards with S-Video out also
support Composite out via a
S-Video-to-Composite
adapter*. Cards with
Composite out DO NOT
support connection to TVs with
S-Video Input.
CRT display +
TV
VGA connector +
TV Output
*available from www.ati.com