Troubleshooting guide

SECTION 4

MAINTENANCE

SECTION 4 – Maintenance

This section covers how to care for the Ink Tanks, Printhead Cartridge, Service Station, clear paper jams

and replace the Sheet Separators.

Replacing the Ink Tanks

Replace the Ink Tanks when the ink runs out.

1. Open the Printer Toolbox. Go to All Programs, open

the Colordyne Folder and open the Toolbox. On the

Opening Screen you will see System Status information

in the upper left corner.

2. Open the Front Cover (hinged at bottom).

Open the three Latches [A] and pull the

Ink Tank(s) out of the Printer.

3. Remove the new Tank(s) from packaging.

4. Slide the new Tank (label up) into its

appropriate color slot [B].

INSTALLATION TIP: Make sure the

Tanks seat properly. Insert the Tank

into the appropriate Ink Station, then

pull the Tank back about an inch and

push forward firmly to insure that the

Ink Nozzles penetrate the seals on the

Ink Tanks.