Troubleshooting guide

SECTION 3
OPERATING THE COLORDYNE 1600-S
24
Services Tab
Services allows you to:
 Print Configuration Page – Prints out
the current configuration of the Printer
including current Firmware Version,
Network Connection, printer Serial
Number and more.
 Print Colorbar Page – Prints type and
color bands to check print quality.
 Print Diagnostic Page – Shows basic
Printer information, memory, Network
Settings, Event Log and RAM partitions.
 User Maintenance, Levels 1 to 3
Level 1 – Circulates ink, wipes and
cleans the Printhead Cartridge.
Level 2 – Runs cleaning and wiping
routine twice for better flushing and
cleaning.
Level 3 – Runs the cleaning routine
multiple times for the most thorough
flushing and cleaning of the Printhead.
NOTE: If the Printer is connected to a
network and the Driver buttons fail to activate the cleaning process, you can perform the
same functions from the Toolbox User Interface.
 Wipe Printhead – Wipes and cleans excess ink from the Printhead Cartridge.
 Printhead Release – Performs the same task as the Cover Release button on the Printer. Deprimes
the ink from the system and opens the Printhead Cover for removing/installing the Printhead
Cartridge.
 System Deprime – Drains the ink in the lines back into the Ink Tanks before servicing the
Printhead Cartridge or prepping the Printer for storage or transport.