Troubleshooting guide

SECTION 2
INSTALLING THE PRINTER
11
4. After a few moments the “Printer Connections”
window opens. Click “Configure to print using
USB”. Then click Next>.
5. After a few moments the “M Series Driver”
window opens followed by the “Would you like
to install this device software?” window. Click
“Install” and the driver software will load from
the disk.
6. The software will start to download and a
second “Would You Like to Install This Device
Software” opens. Click Install.
7. The “Connect Device Now” window opens.
Switch the Printer on and connect the USB cable.
Don’t click on either button. The software will
then finish installing.