Manualshelf

Service manual

ManualsBrandsColordyne ManualsComputer equipment1600-S
81828384858687888990
SECTION 6
MAINTENANCE
84
Reinstalling or Replacing the Service Station
1. Carefully unwrap the new Service Station. (Or
reuse cleaned Service Station.) NOTE: Loose
parts may fall out. Keep Roller side facing up
when removing packaging.
CAUTION
MAKE SURE THE LATCHES ON
THE WIPER ROLLER ARE FULLY
LOCKED BEFORE INSTALLING
THE SERVICE STATION.
2. Slide the Latch open on the Service Station Circuit
Board.
3. [1] Plug the Ribbon Connector (blue side up) into
the space under the Latch.
[2] Close the Latch.