Service manual

SECTION 6

MAINTENANCE

SECTION 6 - Maintenance

This section covers how to care for the Ink Tanks, Printhead Cartridge, Service Station, clear paper jams,

and replace the Sheet Separators.

Replacing the Ink Tanks

Replace the Colordyne 1600-S Ink Tanks when the ink runs out.

1. Open the Toolbox. Go to All Programs, open the

Printer Folder and open the Toolbox. On the opening

screen you will see System Status information in the

upper left corner.

2. Open the Front Cover (hinged at bottom).

Open the three Latches [A] and pull the

Tank(s) from the unit.

3. Remove the new Tank(s) from packaging.

4. Slide the new Tank (label up) into its

appropriate color slot [B].

INSTALLATION TIP: Make sure the

Tanks seat properly. Insert the Tank

into the appropriate Ink Station, then

pull the Tank back about an inch and

push forward firmly to insure that the

Ink Nozzles penetrate the seals on the

Ink Tanks.