Service manual

SECTION 5

DISASSEMBLY AND ASSEMBLY

Main Printed Circuit Assembly (MPCA) Cover

Removing the Main Printed Circuit Assembly (MPCA) Cover

To get access to parts on the Print Engine clamshell, the MPCA Panel Cover must be removed and the

panel folded out of the way.

1. Remove (4) screws to remove the

Cover. Set aside. NOTE: End Panel

screws intentionally left off to

improve accessibility.

2. Remove two (2) mounting screws from bottom

of MPCA Panel.

3. Fold Main Printed Circuit Assembly down out

of the way. NOTE: Be Careful! DO NOT pull,

pinch or strain wiring.