Service manual

SECTION 5
DISASSEMBLY AND ASSEMBLY
53
13. Lift and support the Printer so you can reach underneath to access and remove the (4) screws holding
the bottom of the Print Engine to the Base Plate.
14. Carefully slide Print Engine
out of Printer. (Print Engine
is entire unit including the
Ink Station)
15. Reassemble in reverse order.
IMPORTANT!
WHEN REINSTALLING THE PRINT ENGINE, MAKE SURE THAT
THE ALIGNING PINS ARE FLUSH WITH EACH OTHER WHEN
THE PRINT ENGINE IS PUSHED AGAINST THE FRONT
CENTER PLATE ASSEMBLY. EVEN A SLIGHT MISALIGNMENT
MAY CAUSE FEEDING AND PRINTING PROBLEMS.