Service manual

SECTION 5
DISASSEMBLY AND ASSEMBLY
50
6. Remove Ink Station Door. Carefully unhook the (2)
springs (one each side), then remove the mounting screw
from the left-hand side (Control Panel Side). Remove
Door and set aside.
7. Remove Top Cover. Remove mounting screw from left-
hand side (Control Panel Side). Remove Top Cover and
set aside.
8. [A] Remove the (2) screws holding the left-hand
side Media Separator Guide.
[B] Remove the (3) screws on left-hand side of the
machine that hold the Center Plate in place.