Service manual

SECTION 5

DISASSEMBLY AND ASSEMBLY

Replacing Delivery Rollers

The Delivery Rollers are part of the Front Center Assembly on the feed end of the Print Engine.

1. Remove the Left-hand Rear Side Cover by removing the (2) screws

at the top and bottom of the Cover. Remove the Cover.

2. Remove (2) screws at the

top and bottom of the Left-

hand Front Side Cover. Pull

Cover away from machine

slightly.

[A] Disconnect the wires

attached to the Power, Paper

and Cancel buttons.

Carefully remove the Cover.

NOTE: Wires are labeled to

simplify reconnection.

3. Remove the Right-hand Side Cover.

Remove the (3) screws at the top of the

Cover. Then remove the (3) screws from

the bottom of the Cover.