Service manual

SECTION 5
DISASSEMBLY AND ASSEMBLY
37
Left-hand Side Covers
1. Remove (2) screws at the
top and bottom of the Left-
hand Rear Side Cover.
Remove the Cover.
2. Remove (2) screws at the
top and bottom of the Left-
hand Front Side Cover. Pull
Cover away from machine
slightly.
[A] Disconnect the wires
attached to the Power,
Paper and Cancel Buttons.
Carefully remove the
Cover. NOTE: Wires are
labeled to simplify
reconnection.
3. Reassemble in reverse order.
NOTE: Make sure that the wires are
connected to the correct Control Panel
Button.
Components under Left-Hand Side Covers
1. Main Print Engine
Printed Circuit Board
2. Printed Circuit Board
USB Connector
3. Printed Circuit Board
Network Connector
4. Printed Circuit Board
Main Power Connector
5. Wiring harness for
Control Panel Buttons
6. LCD Counter