Service manual

SECTION 3
FUNCTIONAL OPERATION
27
Using the Toolbox
Once the Printer Driver is installed you have access to the Toolbox. The Toolbox lets you monitor ink
usage, perform diagnostic checks, print reports and run maintenance tasks on the Printer from your
computer.
To open the Toolbox:
Click Start from the Windows taskbar, go to All Programs, open the printer folder, then click on
“Toolbox”. When the “User Interface” window opens you will find a series of Menu Options you can click
on at the lower left of the screen. You can check the Printer Status in the upper left part of the screen.
User Interface
[A] Screen Buttons: Let you perform
maintenance and operating tasks. You can use
the screen buttons to Clear Errors, Cancel a Job,
Reset the Job Counter, and Reset the Page
Counter. You can also:
Wipe Printhead – Activates the Service
Station to wipe the Printhead.
Release Printhead – Performs the same task
as the Cover Release button on the Printer.
Pumps the ink back into the Ink Tanks and
opens the Printhead Cover to remove/install
the Printhead Cartridge.
Circulate Ink – Purges air from the lines and
primes the system after replacing the Ink
Tanks or Printhead Cartridge.
System Deprime – Pumps the ink back into the Ink Tanks prior to replacing the
Printhead Cartridge or transporting the Printer.