Service manual

SECTION 1

INSTALLATION

Install the Ink Tanks

Printer uses a single Printhead Cartridge and five Ink Tanks (two Black, one Cyan, one Magenta, and one

Yellow). Install the Ink Tanks as follows:

TURN PRINTER OFF:

1. Open the Toolbox. Go to All Programs, open the

Printer Folder and open the Toolbox. On the Opening

Screen you will see System Status information in the

upper left corner.

2. Open the Front Cover (hinged at bottom).

Open the three Latches [A].

3. Remove the new Tank(s) from packaging.

4. Slide the new Tanks (label up) into their

appropriate color slots [B].

INSTALLATION TIP: Make sure the

Tanks seat properly. Insert the Tank

into the appropriate Ink Station, then

pull the Tank back about an inch and

push forward firmly to insure that the

Ink Nozzles penetrate the seals on the

Ink Tanks.