Troubleshooting guide

SECTION 3

OPERATING THE COLORDYNE 1600-S

Ink Usage

Allows you to monitor the estimated amount of ink left in each of the five Ink Tanks. You can monitor ink

consumption and schedule Tank changes (saving down-time during a print run.) NOTE: Ink Usage only

works when you start with a new Ink Tank and leave it in the Printer.

Ink Estimation Mode – Checking this box lets you predetermine how much ink a given job may use prior

to printing. This can be useful for determining per piece costs. The job is sent to the Printer and loads, but

does not print. Once the job is loaded, the chart shows the amount of ink (by color) that the job will use.

NOTE: The estimating process will take as long as the job would take to print (i.e., if the job would

take 1 hour to print, the estimate will take 1 hour to display.)

Network Configuration

Permits you to view, enter or change settings to connect the Printer to your network.

Network Connection Set Up:

1. The Printer is still connected to the computer via the USB cable.

To connect the Printer to a network, open the Toolbox. On the User Interface page, click

“Network Config.”