Troubleshooting guide

SECTION 3
OPERATING THE COLORDYNE 1600-S
These buttons control functions that require the machine to be out of service for extended periods of time
while they are being performed.
Wipe Printhead – Activates the Service Station to wipe the Printhead.
Install Service Station – Pulls the Service Station back into place after cleaning, repair or replacement.
Eject Service Station – Releases the Service Station for removal for cleaning, repair or replacement.
Release the Printhead – Performs the same task as the Printhead Release button on the Printer. Pumps
ink back into the Ink Tanks and opens the Printhead Latch to remove or install the Printhead Cartridge.
NOTE: This function can also be accessed by pressing the “Release Printhead” button on the Print
Engine.
System Deprime – Pumps ink back into the Ink Tanks prior to replacing the Printhead Cartridge or
transporting the Printer.
Shutdown – Turns the Printer OFF from your computer.
[D] Display Language – Selects the language the Printer will operate in.
31