Troubleshooting guide

SECTION 3
OPERATING THE COLORDYNE 1600-S
Using the Printer Toolbox
To open the Toolbox:
Click on the Windows Logo select all programs then select Colordyne click on Toolbox. When the User
Interface window opens you will find a series of Menu Options you can click on at the lower left of the
screen. You can check the Printer Status in the upper left part of the screen.
User Interface
[A] Screen Buttons: Let you perform maintenance and operating tasks. You can use the screen buttons to
Clear Errors, Cancel a Job, Reset the Job Counter, and Reset the Page Counter. You can also:
Replace Ink Tanks – Disconnects Printer communication with Ink Tank Sensor. Allows you to safely
remove Ink Tanks for replacement.
Refresh Ink Levels – Used to update or confirm the ink levels shown at the left of the screen.
Circulate Ink – Purges air from the lines and primes the system after replacing the Ink Tanks or
Printhead Cartridge.
Cleaning Buttons: Provide 3 levels of cleaning for the Printhead Cartridge. These work the same way as
the “Clean Printhead” buttons in the Printer Driver:
Quick Clean Printhead – Circulates ink, wipes and cleans the Printhead Cartridge.
Normal Clean Printhead – Runs cleaning and wiping routine twice for better flushing and cleaning.
Full Clean Printhead – Runs the cleaning routine multiple times for the most thorough flushing and
cleaning of the Printhead.
29