Troubleshooting guide

SECTION 3
OPERATING THE COLORDYNE 1600-S
Using Layout Tab Printing Adjustments
Image Position – Use the Left Adjustment move the image area (-3mm left to +200mm right)
from the left edge of the media. Use the Top Adjustment to move the image up or down (-5mm up
to + 200mm down) from the top left corner of the media used. (0.1mm increments)
Max Page Width – Lets you set how wide the actual print area will be. (0.1mm increments)
NOTE: Can be no larger than the maximum print width for the printer (8.5"/220.8mm).
Purge Bar Position* – In operation, the Printhead spits a small amount of ink in the gap between
pieces to keep the nozzles refreshed. For irregular-shaped pieces (like an envelope flap), the sensor
may “read” the lower end as the edge and spray on the tip of the flap instead of the actual gap
between pieces. This feature allows you to manually set the gap (in 0.1mm increments) to account
for the extra length needed to reach the actual gap.
* See also “Purge Bar Position” in the Printer Toolbox section.
• Watermark – Prints a light background watermark in the paper while printing the original
document. When this option is selected the “First page only” option prints the watermark on the
first page, but not subsequent pages, unchecking prints the watermark on all pages. The Custom
button lets you create a new watermark or edit an existing watermark, including font selection,
color, size and printing angle.
• My Print Settings – Access your saved custom print settings for various jobs.
27