Troubleshooting guide

SECTION 2

INSTALLING THE PRINTER

3. Open the Ink Tank Door (hinged at bottom). Open the three Latches [A].

4. Remove the new Tank(s) from packaging.

5. Insert the new Ink Tanks (labels up) into their appropriate color slots [B]. Close the three Ink Tank

Latches.

INSTALLATION TIP – Make sure the Ink Tanks seat properly. Insert the Ink Tank into

the appropriate Ink Station, then pull the Ink Tank back about an inch and push forward

firmly to insure that the Ink Nozzles penetrate the seals on the Ink Tanks.

6. Click “Continue” on the Confirm screen, then “Refresh Ink Levels”. The ink colors fill in as

the Ink Tanks are installed. If the ink colors do not fill in after a few seconds, click the “Replace

Ink Tanks” button and clean the contacts on the Ink Tank with a Pencil eraser then reinstall the

Ink Tank(s).

7. Close the Front Cover.

WARNING!

The ink in the Ink Tanks may be harmful if swallowed. Keep new and

used Tanks out or reach of children. Discard empty tanks immediately.