Troubleshooting guide

SECTION 2
INSTALLING THE PRINTER
SECTION 2 – Installing the Printer
Contents of Packaging
1.
Colordyne 1600-S Printer
2.
Ink Tanks – Cyan, Magenta, Yellow, Black, Black
3.
Printhead Cartridge
4.
Media Side Guides: Registration (Fixed) and Adjustable –
mounting screws attached to Printer
5.
Rear Media Support Guide
– thumbscrew attached to Printer
6.
Media Support Wedges: Narrow and Wide
– mounting hardware attached to Rear Media Support
Guide
7.
Envelope Attachment Spacers (pkg. of 2)
8.
AC Power Cord
9.
USB Cable
Before using the Colordyne 1600-S Printer the following must be done:
• Choose a location for the Printer
• Unpack and assemble the Printer
• Hydrate the Printhead Cartridge
• Remove the Service Station Transport Tab and Shipping Tape
• Plug in the Printer
• Install the Printer Driver
• Install the Ink Tanks
• Install the Printhead
• Set up the feed on the Printer
Choose a Location
The Colordyne 1600-S should be placed on a sturdy level worktable or cabinet at least 9 inches from
any walls. Protect the Colordyne 1600-S from excessive heat, dust, and moisture – avoid placing it in
direct sunlight.
Unpacking and Setup
Remove the Printer and its parts from the carton. Remove all packing tape. The screws that attach the
various parts of the Guides to the Printer are under the tape in their respective positions.
6