User Manual

ManualsBrandsCOLOR ZEBRA ManualsOtherCOLOR ZEBRA V10 Wireless Electronic Earbuds

Parameter specification

Version V5.2+EDR

Support A2DP,AVRCP,HFP,HSP

Transmission distance 10m

Frequency range 2.402GHz~2.480GHz

Hi-fi equipment Φ6mm*2

Impedance 16Ω

Standby time 70 hours

Talk time 5 hours

Listening time 6 hours

Earbud battery capacity 55 mAh

Charging time 1.5 hour

Charging case battery capacity 300mAh

Charging case charging time About 1 hours

Weight(single earbud) 4.7 g

Indicator Light

Ear Cap

Charging Contact Pin

Charging Case Indicator Light

V10

User Manual

Thanks for using our wireless electronic

products. For a good user experience, please

read the manual carefully before using the

products. Notice: To avoid unnecessary

troubles, please do not disassemble these

products by yourself and use the standard

charger to charge.

Product Overview

Earbuds indicator

Charging

Full battery

Charging case indicator

Button control

Restore factory setting

There is a built-in lithium battery in this

product. To avoid explosion, do NOT

expose the product to strong sunlight,

fire or throw it into fire.

Battery Warning ！

Attentions

1.Do not use corrosive liquid to clean this product.

3.Do not use this product under extreme circumstances

for temperature below -10 degree Celsius or above

60 degree Celsius .

4.To avoid explosion, please do not throw this product

into fire.

5.To avoid scratches, please do not touch the earbuds

with sharp objects.

6.Do not insert objects into the earbuds, otherwise it

would cause damage to the internal components.

7.Do not disassemble the earbud.

8. Please keep regular charge to earbuds, don’t leave

them become empty battery status to keep their lifetime.

9. Please do not charge products with power

adapter over 2A current. Excessive current may

cause the damage to battery.

2.If it comes into contact with chemicals, please rub

it with a damp cloth wet with clean water.

Choose the ear cap that suits you.

MFB Power Switch

1x 1x

Decline

Reject

track

Next track

Volume- Volume+

Play / Pause

Voice assistant

Siri and other Voice Assistant

The voice assistant will be automatically activated

depends in different OS in mobile system.

demonstration

Error

L / R Earbud

Settings

Bluetooth

V10

Bluetooth

Now discoverable as”Qi iPhone”.

MYDEVICES

To pair Apple Watch with your iPhone, go to the

Watch app.

Settings

Bluetooth

V10

Bluetooth

Now discoverable as”Qi iPhone”.

MYDEVICES

To pair Apple Watch with your iPhone, go to the

Watch app.

1 3 5 7

9 11 13

2 4 6

8 10 12 14

First time using

Make sure that the ear

caps face down and put

the earbuds into the ear

in the angle shown as

the picture on the right.

After putting on the

earbuds, gently

rotating the earbuds

to a comfortable and

secure position shown

as picture 3 on the right.

Now the earbuds are

put on correctly!

Do not wear the earbuds

like the way shown as

the picture on the right

1.Tear off the

insulating film.

2.Put the earbuds into

the charging case to

charge.

3.Take out from case

the indicator will turn to Red

and Blue alternately.

If there is water droplet on the surface, please wipe it with

a dry cloth before putting them back into the charging case

to avoid demaging the device.

The Charging cable

is not waterproof

The Charging case

is not waterproof

Do not use hot water to

disinfect the product

Tip:

1. If the product is dirty, please do not rinse it directly with water

or use boiling water to soak and disinfect it. It is recommended

to wipe the earbuds with an alcohol cloth or a wet paper towel.

2.If the product falls into the water accidentally, please pick it

up in time and dry it with natural wind or dry it in the sun for

two hours before using it. (Otherwise it will affect the sound

quality, thus fail to give you a better using experience)

Take-out from case.

press and hold for 5 seconds.

When back into case.

no connection for 5 minutes.

OFF

4.Turn on the Bluetooth function on your phone

and search for【V10】and connect it.

△ If you want to switch the Bluetooth connection

to another device, please disable the Bluetooth

function in the previously connected device OR

delete the pairing name of "V10" from the original

device. Then the pairing name of "V10"can be

searched in new device and connected successfully.

PAU

If there is only one of the earbuds working due to

misoperation, please follow below steps to fix it.

1. Clear the record: Turn off the Bluetooth function of

the phone, touch the MFB buttons for about 5 seconds

when the earbuds are turned off. The earbuds will enter

the pairing state (red/blue light flashes alternately), and

then touch the MFB buttons four times quickly. After the

red light is on for 1 second, the factory settings will be

restored and the earbuds will automatically shut down.

Reset: Put the left and right earbuds back into the

charging case at the same time and reactivate them.

3. Automatic pairing: Take out the left and right earbuds

at the same time to automatically complete the pairing.

4. After the earbuds are restored to the factory settings,

please delete the historical connection record "V10",

then search and reconnect again.

iOS users can triple-tap the left or right earbud

to activate Siri and tap once to turn off Siri (this

function only supports iOS system).

Left/right Earbud Connection & Pairing

Tips: If the two earbuds can’t pair under the first time

using, or there is no sound in one of the earbuds, please

proceed as follows:

Hold the MFB buttons of the two earbuds simultaneously

for 9s when they are in power off state,the earbuds will

enter the interconnected pairing state (the blue light

flashes quickly). When the interconnection and pairing

of the two earbuds is successful, the red/blue lights of

the two earbuds will be on for 2 seconds at the same

time. Then, they will enter the mobile phone pairing

mode and wait for the connection to the device(red

and blue lights flash alternately).

Charging case

Please use a charger with an output voltage of

DC5V/1A to charge the charging case. You can

also use a computer USB or other USB interface

charger to charge (Must choose a charger certified

by a regular manufacturer）.

Status Indicator

Charging for case

Red light on

Full Battery

Green light on

Charging for earbuds

Red light on

Low Battery

Red

light flashes

Charging

Full battery

Low Battery

Status Light

Turn on The blue light flashes for 1 second

Turn off

The red light flashes for 1 second

Search earbuds Red and blue light flash alternately

Connect with mobile phone successfully No light

Music play No light

Low battery Red light of earbud flashes once every 6s

Charging Red light on

Full battery

Red light off

MFB Power Switch

3.If there is noise, broken sound, or low

sound, please take off the silicone ear

cap and wipe it with a cotton swab.

4.If the earbud is not charged properly,

wipe the charging column with a cotton

swab, and then charge it again.

Notice:

△ If the charging case is out of power, it may

cause the earbuds to fail to shut down and

remain connected to the phone even when

they are placed in the charging case. So

please remerber to charge the charging

case in time.

△ If moisture remains at the audio output hole,

the sound may become fuzzy or completely

inaudible. This is completely normal. In this

case, please remove the earbuds and shake the

audio output hole down several times to allow

water to flow out or let it air dry for 1-2 hours,

then the sound quality will become normal.

Warm notice: If the earbuds are not turned on

or there is no sound come out, please put them

back in the charging case again to make sure that

they are in the charging state before taking them

out for use (red/blue light flash alternately)

MIC

FCC Caution