Technical data

5
Foreword Page #
Part I Installation
A) Uncrating 7
B) Positioning the Machine 7-8
C) Electrical Requirements 8
D) Completing the Installation
Part II Explanation of Controls
A) Electronic Control Panel 9-10
B) Dispensing Handle 10
C) Photo Sensor Switch 10
D) Dispensing Head Safety Switch 10
E) Electric Control Panel 10-11
F) Other Controls 11
Part III Initial Cleaning Procedure
A) Gravity Fed Cleaning Procedure 12
B) Pump Fed Cleaning Procedure 13
C) Disassembling the Dispensing Head 14
D) Disassembling the Beater / Auger 15
E) Cleaning Operations 15
Part IV Assembling the Freezer
A) Assembling the Beaters / Augers 16-17
B) Assembling the Dispensing Head 17-18
C) Assembling the Gravity Feed Tube 19
D) Assembling the Mix Injection Pump 20-21
Part V Sanitizing the Freezer 22-23
Part VI Starting the Freezer
A) Gravity Fed Machines 24
B) Pump Fed Machines 25
Part VII Operating the Freezer
A) Stand By Mode 26
B) Gravity Fed Machines – How to Operate and Make Adjustments 27
C) Pump Fed Machines – How to Operate and Make Adjustments 27
Part VIII Periodic Cleaning Procedures
A) Gravity Fed Machines 28-29
B) Pump Fed Machines 29-30
Part IX Technical Information
A) Refrigeration 31
B) Beater Drive Motor 31
C) Thermal Overload 31
D) Proximity Switch 31
Part X Maintenance
A) Troubleshooting Guide 33-34
B) Alarms 35