Original Operating Instructions Electronic Hand-Mixer double-spindle Manuel d’instructions d’origine Mélangeur électroportatif double-turbine 110 volts - US/CDN-version Stand: 2015-05-07
4 3 5 6 1 2 7 8 9 10 Fig.
Technical data Xo 55 duo Rated power/Current consumption: 1450 W Power supply: 110-125 V Frequency: 50/60 Hz No-load speed, first gear - 640 min-1/ Rpm under load, first gear - 430 min-1 Mixing tool 50 - 90 liters: MKD 140 HF Alternative mixing tool, 10 - 50 liters: Weight w/o mixing tool: MKD 120 HF 6,9 kg / 15.
Machine-specific safety instructions WARNING: Read all notes and instructions on safety. Failure to observe any of the notes and instructions on safety may result in an electric shock, fire and/or serious injury. Make sure that you keep all notes and instructions on safety for future reference. To be able to use the machine safely it is essential that you read the operating instructions and the safety instructions thoroughly and comply with all of them.
Proper use Operation The machine is designed for mixing liquid, granular and powder-based building products such as paints, mortar, concrete, adhesives, plaster, mixes containing silica sand, thermosetting resin and similar substances. Use the right mixing tool for the consistency of the material and the quantity to be mixed. ►Check that the power supply shown on the rating plate is the same as the mains power supply. Always hold the machine with both hands.
Care and maintenance Content ►Before you carry out any operations on the machine, and especially when changing the mixing tool, always pull out the power plug out first. Clean the machine and the mixing tool immediately after use. We recommend that you use the Collomix MIXER CLEAN cleaning bucket for cleaning. Keep the HEXAFIX coupling clean and freely moving at all Fett times. Grease Take the mixing tool out of the Graisse coupling after you have finished Smar your work.
