Service manual

3
READ THIS ENTIRE PAGE BEFORE PROCEEDING
FOR SAFETY OF PERSONNEL AND TO PREVENT DAMAGE TO EQUIPMENT, FOLLOWING
NOMENCLATURE HAS BEEN USED IN THIS MANUAL:
DANGER
Failure to observe precautions noted in this box can result in severe bodily injury or loss of life.
WARNING
Failure to observe precautions noted in this box can cause injury to personnel by accidental contact
with equipment or liquids. Protection should be provided by the user to prevent accidental contact.
CAUTION ATTENTION
Failure to observe the precautions noted in this box can cause damage or failure of the equipment.
Non compliance of safety
instructions identified by following
symbol could affect safety for
persons:
Safety instructions where
electrical safety is involved
are identified by:
Safety instructions which shall
be considered for reasons of
safe operation of pump and/or
protection of pump itself are
marked by sign:
ATTENTION
ATTENTION
If operation of this pump is critical to your business, we strongly recommend you keep a spare pump or
major repair kit in stock at all times. As a minimum, a minor repair kit (o-rings, gaskets, shaft seal and
bearings) should be kept in stock so pump refurbishment after internal inspection can be accomplished.
CONTENTS
SAFETY AND TABLE OF CONTENTS ....................................................................................... 3
A - GENERAL ............................................................................................................................. 4
B - TRANSPORTATION AND STORAGE ................................................................................... 4
C - DESCRIPTION OF THE PUMP ............................................................................................. 4
D - INSTALLATION/ASSEMBLY ................................................................................................. 4
E - STARTUP, OPERATION AND SHUTDOWN ....................................................................... 16
F - MAINTENANCE................................................................................................................... 20
G - FIELD AND FACTORY SERVICE ....................................................................................... 22
H - TROUBLESHOOTING ........................................................................................................ 23