Service manual

15
NOTE: Refer to pump or pump/driver outline drawing and/or specific pump’s instruction
manual for quench connection size and port locations.
D.10 GAGES
Pressure and temperature gages are recommended for monitoring pump’s operating
conditions. These gages should be easily readable and placed as close as possible to pump’s
inlet and outlet flanges. See Figure 10a.
D.11 IDEALIZED INSTALLATION FOR PUMPS LOCATED ABOVE LIQUID LEVEL
Figures 10a and 10b are compilations of Figures 7, 8 and 9 showing good-practice installation
schemes for pumps located above the liquid reservoir in systems that recirculate the pumped
liquid.
Valves
Filling
Port
Temperature
Gage
Pressure Gages
Relief Valve
SYSTEM
Filter
Pressure Gages
Valves
Temperature
Gage
Outlet
Inlet Trap
Suction
Strainer
Reservoir
Figure 10a – Vertical Mounted Pump
Outlet
Inlet
Filling Port
Seal or Package Leakage Drain Line
Same as Figure 10a
Sam
e
as Figure 10a
Figure 10b - Horizontal Mounted Pump