Installation guide

129098-UIM-H-1011
DGAH FURNACES DGAA FURNACES
SWIVEL FLASHING SLANT
ADJUSTS FROM FLASHING INSTALLATION DIMENSIONS INSTALLATION DIMENSIONS
0/12 TO 5/12 PITCH 3/12 PITCH “w “B"
ADJUSTABLE HEIGHT ADJUSTABLE HEIGHT
4000-7101/C 4000-6101/A 70” to 79” 86" to 95”
4000-7121/C 4000-6121/A 75” to 86” 91” to 102”
4000-7141/C 4000-6141/A 83" to 104” 99” to 120”
4000-7151/C 4000-6151/A 90” to 116” 106” to 132”
4000-7171/C 4000-6171/A 127” to 157” 143” to 173"
"The 4084-7141 is dimensionally the same as 4000-7141/C and is available only in Canada.
* The 4084-7151 is dimensionally the same as 4000-7151/C and is available only in Canada.
FLUE CAREFULLY CAULK ALL AROUND SWIVEL JOINT WITH al aes
/ GASES wo SEALANT SUPPLIED BY FURNACE MANUFACTURER.
19 1/2! 19 1/2"
COMBUSTION
COMBUSTION AIR
AIR a rv
Vv v_
A
CAULK
-—
“~~
CAULK
4
UNDER UNDER
FLASHING FLASHING
The End of Upper Portion of Roof Jack need ROOF
Not extend below the ceiling.
IMPORTANT
SEAL ROOF JACK FLASHING TO THE ROOF JACK
AND ROOF.
THIS IS THE INSTALLER'S RESPONSIBILITY.
a
I
A
A B
76"
59-1/2"
DGAA MODELS
DGAH MODELS
v y ge FLOOR Oe 1 ’
ess" — = ———aaaaasa=
WARM AIR DUCT DUCT CONNECTOR DUCT CONNECTOR WARM AIR DUCT
FIGURE 21: Standard Roof Jack
Johnson Controls Unitary Products 15