DURABILITY • POWER • PERFORMANCE EVE N H E AT™ barb ec u e S M A L L S PA C E S ASSEMBLY MANUAL 85-3066-4 (G35308) Propane 85-3067-2 (G35309) Natural Gas Limited 5-Year Warranty Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts should be claimed within 30 days of purchase. For product inquiries, parts, warranty and troubleshooting support, please call 1-800-275-4617. www.colemanbbqs.
H E AV Y A R T I C L E N E E D S 2 T O L I F T THIS MANUAL MUST REMAIN WITH THE PRODUCT AT ALL TIMES To ORDER non-warranty replacement parts or accessories, or to register your warranty, please visit us on the web at www.colemanbbqs.com CAUTION Sharp edges. Wear gloves when assembling your grill. CAUTION Read and follow all safety statements, assembly instructions, use and care directions before attempting to assemble and cook. INSTALLER OR ASSEMBLER/ CONSUMER DANGER 1. If you smell Gas: a.
HARDWARE PACK TOOLS NEEDED FOR ASSEMBLY • #2 Phillips screwdriver (long and short) • ¼” Slotted screwdriver (long and short) • Adjustable wrench • Pliers For correct hardware assembly, always position the lock washer between the screw and the flat washer. Screw Lock Washer No. Description Part Number Qty.
Parts List (propane) for 85-3066-4 (G35308) Item No. Qty. Description AA 1 Top lid assembly Part No. Item No. Qty. Description G353-6700-01 Part No.
EXPLODED DIAGRAM (PROPANE) FOR 85-3066-4 (G35308) Extras Hardware Pack F1 3 Assembly Manual Safety & Care Manual F2 F3 Tank Screw F4
PARTS LIST (NATURAL GAS) FOR 85-3067-2 (G35309) Item No. Qty. Description AA 1 Top lid assembly Part No. Item No. Qty. Description G353-6700-01 Part No.
EXPLODED DIAGRAM (natural gas) FOR 85-3067-2 (G35309) Extras Hardware Pack F1 5 Assembly Manual Safety & Care Manual F2 F3
ASSEMBLY INSTRUCTIONS 1 Separate the 2 different types of castors: 2 locking castors (EF) and 2 regular castors (EG). EG EG Note: Regular castors (EG) need to be assembled to the front of the bottom shelf (EE), and locking castors (EF) need to be assembled to the back of the bottom shelf (EE), as shown in figure A. EF EF EE Attach the regular castor (EG) to the front of the bottom shelf (EE), and use the Pin (#11) to secure and tighten (Figure B).
ASSEMBLY INSTRUCTIONS 3 Attach the front brace (CG) to the left and right cart side panels (EA & EB). The top of the front brace (CG) can be identified by two clips located on the top left, and right side of this part, as shown in B. CG EB EA TIP: One person should align the left side, while the second person assembles the right side. EE You will need: A 6 6 7 88 X4 X4 X4 Back view B Close up Assemble the Heat Shield (CK) to the left and right side panel (EA & EB).
ASSEMBLY INSTRUCTIONS 5 THIS STEP REQUIRES 3 PEOPLE. DO NOT ATTEMPT ALONE. EXTREMELY HEAVY! A a. Position the top lid assembly and burner box assembly (A & B) onto the cart assembly (C), as shown. B C Front view Attach the upper back panel (CJ) to both the left and right side panels (EA & EB). 6 DO NOT tighten screws until all hardware has been positioned.
ASSEMBLY INSTRUCTIONS Assemble the left and right tracks (CL and CM) for the Quick Clean™ grease tray (CH), as shown in figure A, B and C. 7 CJ CM A CL Back view Tip: Both the left and right tracks (CL and CM) should be inserted into the two clips located on the top of the front brace (CG), as shown in figure B. CF CG B Front view Assemble the back of the left and right tracks (CL and CM) to the upper back panel (CJ), as shown in figure C.
ASSEMBLY INSTRUCTIONS Assemble the door support rail (CN) to the left and right upper side panels (EA and EB), as shown. 8 WARNING: This part may have sharp edges. Wear protective gloves when assembling. You will need: EA CN EB 1 3 4 X4 X4 X4 Front view Left and Right side shelf assembly 9 A a. Assemble the side shelf support bracket A (DA-front) and side shelf support bracket B (DB- back) to the right upper side panel of the burner box.
ASSEMBLY INSTRUCTIONS 9 DC DC DB BA c. Assemble the left and right side shelves (DC) to the side shelf support brackets (DA and DB), as shown in figure D and E.
ASSEMBLY INSTRUCTIONS Electronic Ignition Assembly 10 a. Remove the ignition battery cover (CC2) and the plastic nut from the electronic ignition box (CC1). A CC2 CC1 EB b. Position the electronic ignition box (CC1) through the opening in the right side panel (EB) and secure using the nut. Right side panel, inside view c. Insert an “AA” battery into the battery compartment, as shown. Secure using the ignition button cover (CC2). - + CC2 B Right side panel, outside view d.
ASSEMBLY INSTRUCTIONS a. Assemble the door assembly (EC), to the bottom shelf (EE) by inserting the fixed pin (bottom of door) into the hole provided (figure B). 11 EA EB A EC EE Front view EC EE B Bottom of door b. Assemble the top of the door assembly (EC) to the door support rail (CN), by pressing in the door support pin and aligning with the hole located on the top right corner of the door. Tip: Use a paint scraper to press-in the support pin.
ASSEMBLY INSTRUCTIONS a. Position the Quick Clean™ grease tray (CH) onto the right and left tracks (CL and CM), as shown. 12 b. Position the Quick Clean™ grease cup (CI) in position under the under the Quick Clean™ grease tray (CH). CM CH CL CI Back view a. Position the Even Heat™ heat distribution plates (BD) into the burner box (BA) as shown. 13 BD BA A BD BD B C Close up, back view Close up, front view b. Place the cooking grates (BE) into the burner box (BA), as shown in figure D. BF c.
ASSEMBLY INSTRUCTIONS For propane model only 14 For natural gas model, follow step 15. Attach the regulator (CB) coupling nut to the propane cylinder valve. ATTENTION: For your family’s safety, do not attempt to light this BBQ until you have reviewed pages 4-7 of the Coleman® Even Heat™ Barbecues Safety and Care Manual. All safety and leak tests MUST BE PERFORMED BY THE END USER, prior to lighting this BBQ.
ASSEMBLY INSTRUCTIONS For natural gas model only 15 Attach the natural gas hose (CB), as shown. ATTENTION: In order to complete installation of your Natural Gas BBQ a 1/2” or 3/8” adapter may be required to connect your BBQ’s Natural gas hose to your home gas supply. Contact your natural gas supplier to purchase the necessary part. CB ATTENTION: For your family’s safety, do not attempt to light this BBQ until you have reviewed pages 4-7 of the Coleman® Even Heat™ Barbecues Safety and Care Manual.
ADDITIONAL WARNINGS You have now completed the Assembly of your COLEMAN® EVEN HEAT™ BARBECUE. NEXT STEPS: 1. Position your BARBECUE 2. Read SAFE USE CARE MANUAL 3. Perform Grill Safety Check-list WARNING: FOR YOUR FAMILIES SAFETY, DO NOT ATTEMPT TO LIGHT THIS BBQ UNTIL YOU HAVE REVIEWED PAGES 4-7 OF THE COLEMAN SAFE USE AND CARE MANUAL. ALL SAFETY AND LEAK TESTS MUST BE PERFORMED BY THE END USER, PRIOR TO LIGHTING THIS BBQ.
Join the conversation facebook.com/colemangrills twitter.com/colemangrills Manufactured by Winners Products Engineering Ltd. Coleman ®, and are registered trademarks of The Coleman Company, Inc. used under license. ©2016 The Coleman Company, Inc. www.colemanbbqs.
