Use and Care Manual

Additional Features (cont’d)
Connecting And Charging Your Extension Pack (sold separately)
Connect the matching end of the
power cord to the port on the
generator, making sure the cord and
port are properly aligned.
Press firmly on the Power Cord to
ensure a secure connection with the
Extension Port of the Battery Generator.
Repeat Steps 2-3 above to connect the
other end of the Power Cord to the
Extension Pack.
Press fuel gauge button to check
battery level or charge status.
Place the Battery Generator next to
the Extension Pack on a clean, dry
flat surface. The rear panels of the
Battery Generator and the Extension
Pack should face towards you.
The Extension Pack Power Cord that is included with your Extension Pack creates a two-way power connection, allowing the Extension Pack to supply backup battery power to the Battery
Generator, and also allows the Battery Generator to recharge the Extension Pack.
IMPORTANT: Please use ONLY the included Extension Pack Power Cord to connect your Battery Generator and Extension Pack. Using another power cord may cause personal injury or cause
damage to your Battery Generator, Extension Pack, damage any connected items, and void your warranty.
IMPORTANT: Please make sure the connector ends of your Power Cord are free of dust, dirt, moisture and debris to avoid shorting out the Battery Generator and/or Extension Pack before
connecting. Please store your Power Cord in a clean, dry place when is not in use to keep it free from contamination.
You will see the "EXT BATT" icon on the
Battery Generator's Intelligent LCD
Screen; the fuel gauge now displays the
combined battery level of both units.
The flat edge of the Power Cord
Connector should face upwards on
The cord to match the shape
Of the Power Port.
Rear panel
Of Battery Generator
Extension Ports
Rear panel
Of Extension Pack
+EXT BATT
888%
888
WATTS
54 6
The fuel gauge will flash as both units
charge. The fuel gauge now displays the
combined battery level of both units.
3
1 2 3
SOLAR INPUT
RED
Connect your Power Cable to the Battery
Generator and the Extension Pack. Both
units will now begin charging together.
Rear panel
Of Battery Generator
Extension Ports with Power Cable
Rear panel
Of Extension Pack
2
SOLAR INPUT
RED
SOLAR INPUT
RED
TIME
TO FULL
WATTS
Battery fuel gauge bars will flash as the total
charge level of both the Battery Generator and
the Extension Pack increase.
700
1:00
Charging Your Extension Pack
The Extension Pack cannot be charged separately; it is designed to connect to the Battery Generator unit to charge and recharge.
IMPORTANT: Please ensure that the Battery Generator is connected to either AC or solar power while it is charging the Extension Pack to avoid depleting the Battery Generator’s own battery.
EXT BATT
Plug the Battery Generator into AC
and / or solar power.
SOLAR INPUT
AC INPUT
RED
1
OR