Use and Care Manual

EXT BATT
Additional Features
What is the Extension Pack? (sold separately)
The Extension Pack is an external battery pack which provides extended run time for your
Battery Generator. When you need more battery capacity, simply connect the Extension Pack.
Using the Extension Pack to supply extra battery runtime
Using your Battery Generator as a stand-alone portable power pack
When you are done using the outlet(s) and USB port(s), press the
button again to turn them off. This will keep the internal battery from
passively draining.
Additionally, when an output is not used for more than five hours it
will automatically turn off to conserve battery power. To bypass this
feature, please see “Power-Save Off” section on next page.
Each output type (USB, AC, DC) has a separate power button with an indicator light to show that it is on. When any port is on, the intelligent LCD screen will also turn on.
You can turn off the intelligent LCD screen at any time by pressing the DISPLAY button below the screen.
Conserving Battery Power
You can power and charge several items at once using any
combination of available AC/12V outlets and USB ports, as long
as the total combined power draw of all connected items does
not exceed the rated Output Power.
Please note: The more items that are connected, the faster your
Battery Generator will consume its available battery power and
needs to be recharged.
Connecting Multiple Items
2
The Intelligent LCD Screen will show
output power and “Time To Empty”.
Plug your item(s) into the Battery
Generator and press the button to
activate the outlets. (Example shown:
USB ports)
NOTE: If your device's power cycles between
high and low modes, the “Time To Empty” time
will also cycle. The actual run time will
be an average.
120V AC
USB
12V
DISPLAY
12W
12W
100W
WATTS
TIME
TO EMPTY
1
Plug the AC charging cord into
the AC Input on the back of
the Battery Generator. Plug the other
end of the cord into an AC outlet.
Using your Battery Generator as an Uninterrupted Power Supply
Your Battery Generator can serve as an Uninterrupted Power Supply (UPS) to provide reliable backup power during outages. If the Battery Generator is connected to AC power and turned ON, when an outage is detected,
internal sensors automatically activate the Battery Generator to power any electronics that are plugged into its output ports. This is a valuable way to keep refrigerators, televisions, Wi-Fi routers and other critical household
devices and appliances working when you need them the most. (For a list of suggested compatible items and approximate run times, see “Household Items: Approximate Run Times”).
When an outage occurs, the Battery
Generator automatically supplies power
to your connected items. See "House-
hold Items: Approximate Run Times".
Keep the Battery Generator plugged into
an AC outlet, even while you are
currently experiencing a power outage.
Once power has been restored, your
Battery Generator will automatically
begin recharging and will stop charging
when full — no user action required.
The lower the wattage of your
electronics, the longer the Battery
Generator will be able to power them. If
you must connect a larger-wattage
device (such as a refrigerator or sump
pump), you may wish to connect ONLY
that item to maximize your battery time.
Automatic
Recharging
Conserving Power
3
AC/UPS
USB 12V
DISPLAY
15W
15W
60W
SOLAR INPUT
AC INPUT
RED
1
AC/UPS
USB 12V
DISPLAY
2.4 A
2.4 A
3.0 A
1
Press the AC/UPS button located near
the output. Hold for three (3) seconds.
While in UPS mode, the output LED
will flash.
2
3
SECONDS
PRESS / HOLD