SDS
6/6
No Result
Test 1 Pass
Test 2 Pass
Test 3 Pass
Test 4 Pass
Test 5 Pass
Test 6 Pass
Test 7 Pass
Test 8 Pass
Forced discharge
- No disassembly, no fire
within 7 days after the test
14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
- Not applicable
SECTION 15: REGULATORY INFORMATION
15.1. Safety, health and environmental regulation / legislation specific for the substance or mixture
SECTION 16: OTHER INFORMATION
16.1. Other information
- The data in this Product Safety Data Sheet relates only to the specific product designated herein and does not relate to use in combination with any
other product or in any process. This PSDS may not meet regulatory requirements in other countries. This information is based on technical
information believed to be reliable. It is subject to revision as additional knowledge and experiences are gained.
- This product is not hazardous under the criteria of the Federal Occupational Safety and Health Administration(OSHA) Hazard
Communication Standard.(29 CFR 1910.1200)
External short circuit
- No disassembly, no rupture, no
fire within 6 hours after the test
- Max. Temp ≤ 170℃
Impact or Crush
- No disassembly, no fire
within 6 hours after the test
- Max. Temp ≤ 170℃
Overcharge
- No disassembly, no fire
within 7 days after the test
- Tunnel Restriction Code : 2 (E)
- This product passed 1.2M drop test and comply with UN38.3.
Test item
14.6. Special precautions for user
- Local transport follows in accordance with Dangerous goods Safety Management Law.
- Package and transport follow in accordance with Department of Transportation (DOT) and other regulatory agency requirements.
- EmS FIRE SCHEDULE : F-A (General fire schedule)
- EmS SPILLAGE SCHEDULE : S-I (Flammable solids (repacking possible))
- Emergency Action Code : 4W(1)
Criteria
Altitude simulation
- After OCV (%) ≥ 90%
- No leakage, no venting, no
disassembly, no rupture, no fire
- Mass loss limit (leakage)
1) If M<1g, less than 0.5%,
2) If 1g≤M≤75g, less than
0.2%,
3) If M>75g, less than 0.1%)
Thermal test
Vibration
Shock