SDS

Coleman Pine Scented Candle Tin Page 2 of 5
a-Terpineol
0.0250%
10482-56-1
Decanal
0.0250%
112-31-2
Geranyl acetate
0.0250%
105-87-3
Benzyl acetate
0.0250%
140-11-4
Vanillyl alcohol
0.0250%
498-00-0
Triethyl citrate
0.0200%
77-93-0
Eugenol
0.0050%
97-53-0
Vanillin
0.0500%
121-33-5
Ethyl maltol
0.0250%
4940-11-8
Nerolin
0.0050%
93-18-5
Nerol
0.0050%
106-25-2
Benzyl benzoate
0.1750%
120-51-4
Isobornyl Acetate
1.0000%
125-12-2
a-Pinene
0.4000%
3856-25-5
Iso-Longitolanone
0.2000%
23787-90-8
Iso E Super
0.5000%
54464-57-2
Diisooctyl adipate
0.7000%
103-23-1
NOTE: This data represents typical values, not product specifications. No guarantee of accuracy or completeness
is made. No responsibility is assumed for any kind of loss or damages arising from use of this data.
•SECTION 4 - FIRST AID PROCEDURES•
EMERGENCY AND FIRST AID PROCEDURES
INHALATION: Remove from exposure and move to fresh air immediately. Get medical aid if discomfort develops.
SKIN: Remove contaminated clothes and rinse the skin with plenty of water, and then clean with water and soap.
EYES: Wash immediately with large volumes of fresh water or saline for at least 15 minutes, lifting the upper and
lower eyelids. Get medical attention.
INGESTION: Gargle to remove taste from mouth.
•SECTION 5 – FIRE-FIGHTING MEASURES•
FLASH POINT: 199 °C
METHOD USED:
ESTIMATED
EXTINGUISHING MEDIA: Depending on the surrounding environment on fire, use of all kinds of extinguishing
agent is allowed: FOAM, CO2, DRY CHEMICAL, WATER FOG
SPECIAL FIREFIGHTING PROCEDURES: Water may be used to cool containers to prevent pressure build-up
and explosion when exposed to extreme heat. If water is used, fog nozzles are preferred. Wear goggles and self-
contained breathing apparatus.
UNUSUAL FIRE AND EXPLOSION HAZARDS: None
DANGEROUS COMBUSTION PRODUCTS: None
•SECTION 6 - ACCIDENTAL RELEASE MEASURES•
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
It is advised that the staff wear appropriate personal protective equipment. Remove all sources of ignition.
Ventilate area. Sweep up solid material. Clean up area with absorbent material and place in closed containers for
disposal.
If molten when spilled, apply absorbent material and allow to cool before sweeping and collecting material. If
molten material is spilled on heat-sensitive items, cool rapidly with water. Then clean up solid material for disposal.