Specifications

To Set Up

■ Unhook Brace. Insert wire in

receiver hole.

CAUTION

NOTE: Use 16.4 oz disposable propane cylinders only. Do not connect to bulk

propane systems. The LP-gas cylinder(s) used with catalytic heaters must be

constructed and marked in accordance with the specifications for LP-gas cylinders

of the U.S. Department of Transportation or Transport Canada, CAN/CSA B339.

■ Attach Heater Assembly to Regulator Assembly hand tight.

• SERVICE SAFETY

• Keep all connections and fittings

clean. Inspect propane cylinder and

heater propane connections for

damage before attaching.

• During set up, check all connections

and fittings for leaks using soapy

water. Bubbles indicate a leak. Never

use a flame.

■ Unit includes Heater

Assembly, Regulator

Assembly, and Support

Leg. Propane tank is not

included.

Support Leg

Regulator

Heater

Unhook

Brace

■ Align Support Wire with Hole.

■ Insert Support Wire into Hole.

■ Hook the Brace.

Hook the

Brace

■ Support Brace assembled.