Use and Care Manual

Coleman Roto Mold Spa (online sales)
LTR50001136, Rev. A
Cleaning and Maintenance
27
Maintenance Schedule
Each time you rell the spa Follow the section “Starting the Spa with Fresh Water” on page
21.
Prior to each use Test the spa water using either test strips a reagent test kit. Adjust
chemical levels as necessary.
Once a week Test the spa water using either test strips a reagent test kit. Adjust
chemical levels as necessary.
If your water source is high in calcium, add stain and scale pre-
venter.
Once a month Deep clean your spa’s lter. (Follow lter cleaning instruction at
beginning of this section)
Every two to four months Drain and clean your spa with a multi-purpose cleaner for spas.
Clean and treat spa cover, pillows, and cabinet (if equipped) with a
vinyl cleaner for spas.
Rell your spa, following the section “Starting the Spa with Fresh
Water” on page 21.
Every four to six months Change the spa water. You may nd the need to change your spa
water more frequently with heavy use.
When empty, your spa should be cleaned with a non-abrasive
cleaner and then rinsed thoroughly.
Every six months Retighten jets using the jet wrench tool, following the instructions
on page 26.
Once a year Replace lter cartridges if the pleats appear frayed.
If you use an ozonator, you will need to replace the ozone car-
tridge.