Installation guide

035-20530-001Rev.B(0804)
FIGURE 13: Remove bottom screw from air vane,
loosen top screw and rotate air vane counterclockwise.
Use caution when rotating air vane so that foil faced
insulation is not damaged.
FIGURE 16: Rotate liner upward to hook on overflame
baffle.
FIGURE 14" Remove burner chute mounting screws
(4) and remove burner chute.
FIGURE 17: Make sure the hooks on Part A straddle
the rear right-hand leg of overflame baffle.
FIGURE 15: Insert stainless steel liner piece (Part A)
with clips first.
FIGURE 18: Push Part A of liner as far forward as leg
will allow.
Unitary Products Group 5