Technical data

5) Turn the adjustment sleeve of the aravity until the medium
7) Turn the selector switch to the "AUTO" position.
sized hole for moderate production-is aligned with the hole
in the gravity feed tube.
Mlnlmum Moderaie Maxlmum Energy
A+ Production Productton Production conservation
i:
Figure 12
8) Initial freeze-down of the product will take 7-10 minutes
Gravity Feed Tube Adjustment Settings
dependent on the type of product being frozen.
6) Fill the tanks w~th mix. Total capacity is two
(2) gallons each.
Never fill the tanks higher than the bottom of the slots in the
PART V
gravity feed tube sleeve.
OPERATING THE FREEZER
The machine will automatically shut-off when the product has
been frozen to the pre-set "consistency". After the
7-10 minute
initial freeze-down period, you will hear the beaterlauger drive
motor shut down indicating the product is ready to be served.
The compressor will continue to run for a short period as the
machine automatically directs refrigeration to the mix tanks
immediately after the freeze-down cycle.
To serve, simply place a cup, container or cone under the
dispensing spout and slowly pull the dispensing handle down.
As the product begins to flow, move the cup or cone in a
circular fashion to create a tapering tower.
Max FIII Level -
Figure d 1