Technical data

B) Machine Safety Alarms
This freezer is equipped with built in, self monitoring (Safety) devices, whlch will Interrupt operation of the freezer if activated. When activated, the little red LED
light at the bottom rlght comer of the display monitor will illummate and flash. (refer to Figure 12)
Thls LED will flash when the alarm has been
activated. It will stop flashing, but remaln lit when the machine has reset and resumed operation. To deactivate the LED,
press the Stop
1 Reset button on the touch pad. An alarm code will display (AL1 through AL9), press the Stop I Reset button agam and the LED light should go out.
Alarm Codes
Alarm
# Description
ALl (rta) Motor overload tripped
AL2 (te2) Secondary cylinder probe
AL3 (tel)
TE1 Probe out of order
AL5 (tev) Mix tank probe out
AL6 (tec) Cylinder probe out
AL7 (tgv)
Tank display probe out
AL8 (Ice) Cylinder too cold
AL9 (Ims) Dispensing head switch
Call Technician
No- Press Stop I Reset
Yes if not resettmg m
10 minutes
Yes if not resetting
Yes if not resetting
Yes if not
resettlng
Yes if not resettlng
Yes if not resettlng
No- Allow more mlx to enter
the cylinders
No- Install
dispensing head or
Yes if not resetting
RESET
m
PUSH TO
SELECT
@ AUTOMATIC
@ STAND-BY
'@ BEATER
Figure 12