Technical data

C) Disassembling the Dispensing Head
Loosen and r emove the two dispensing head-r etaining
knobs. The knobs are removed by turning counter
clockwise until loose
Remove the dispensing head by pulling straight out
and
away from the machine.
Disassemble the dispensing head by first opening the
dispensing handle
F"f3
Pull the handle-retaining rod out far enough to allow
the handle to disengage
Return the retaining rod to its original position Using
the metal rod as a base, lever the piston fiom the
dispensing head with the handle
Using the oring removal tool, remove the orings
fiom
each of the piston
Turn the dispensing head over and remove the large
oring fiom the rear of the dispensing head